|
Inductive vehicle detector : |
|
 
|
| Supply voltage: |
24 V DC +20% |
| Current consumption: |
< 40 mA |
| Output: |
change-over contact |
| Maximum output current: |
0,5A 24 V DC |
| Output indicator: |
yellow LED |
| Supply and backup voltage indicator: |
green LED |
| Reverse polarity protection: |
yes |
| Switching range (% of a loop covered by a vehicle): |
min 30% |
| Operating frequency: |
30 kHz |
| Ambient temperature range: |
-15°C... +55°C |
| Protection standard: |
IP20 |
| Switch dimension W x H x L: |
22,5 x 106 x 75 mm |
| Standard loop dimensions: |
1200 x 2000 mm |
| Weight: |
cca 100g |
|
Mounting on a 35 mm din rail.
|
The detector incorporates a loop to be embedded into a slot milled out in the road max. 100 mm under its surface.
The loop with the perimeter of 1200 x 2000 mm can be embedded longitudinally or crosswise.
On request, the detector switching range and the operating frequency can be modified (when several loops placed next to each other).
|
|
Last updated: June 15, 2007
Best viewed with Internet Explorer 4.0
Best view in 800x600 resolution
Author: Jozef Wagner
Updated by: PLOSKON AT
|
